This is the first project that I made using this cartridge and it turned out really nice. So nice in fact that I have taken this idea even further and designed some other pieces of jewelry using other cartridges. I will be posting them on my personal blog (http://craftyscentiments.blogspot.com) later this week. For today's project I designed a very simple pair of earrings.
Here is a list of my supplies.
Heritage Cartridge pg. 68 (silhouette 5)
Black Card stock (Recollections)
Scotch Quick Dry Adhesive
Martha Stewart hole punch
Ranger Perfect Pearls Pigment Kit (Jewels)
Needle Nose Pliers
Jump rings
Silver Plated Ear Wires
Black Card stock (Recollections)
Scotch Quick Dry Adhesive
Martha Stewart hole punch
Ranger Perfect Pearls Pigment Kit (Jewels)
- Forever Red
- Forever Green
- Forever Blue
- Forever Violet
Needle Nose Pliers
Jump rings
Silver Plated Ear Wires
Although the Gypsy is not really needed for this project, it makes designing projects so much easier. You can really see just how big an image will be. I started by cutting the silhouette at 1.5 inches. I cut 2 layers for each earring. One set I cut in the original orientation, and the other set I reversed the image to cut them out. I used black cardstock for this project so the colors of the Perfect Pearls would really stand out.
Using Scotch Quick Dry Adhesive, I glued the layers of the silhouette together. I used the Martha Stewart punch to punch a hole at the top of the piece.
Before adding the jump rings and ear wires, I colored the pieces. The Perfect Medium that comes in the kit is like an embossing ink. I stamped the entire piece to cover with it with the thick substance.
The powders come in a variety of colors. The powders are very fine and a little goes a long way. I dusted the entire piece randomly with the Perfect Pearls Powders making sure to clean the brush between colors.
To set the powder, you need to lightly mist it. I used the Mini Mister by Ranger to spray a fine mist in the air. Then you sweep the piece across the mist of water. You really need very little water and by sweeping across the mist that is in the air, you won't use too much water. I then attached the silhouette to the ear wire by using a jump ring.
And here is the finished piece. They are very lightweight and really fun to wear.
That's my project. Thanks for taking the time to view it and I hope you enjoyed it. Be sure to leave me a comment. I would love to hear what you think.
Using Scotch Quick Dry Adhesive, I glued the layers of the silhouette together. I used the Martha Stewart punch to punch a hole at the top of the piece.
Before adding the jump rings and ear wires, I colored the pieces. The Perfect Medium that comes in the kit is like an embossing ink. I stamped the entire piece to cover with it with the thick substance.
The powders come in a variety of colors. The powders are very fine and a little goes a long way. I dusted the entire piece randomly with the Perfect Pearls Powders making sure to clean the brush between colors.
To set the powder, you need to lightly mist it. I used the Mini Mister by Ranger to spray a fine mist in the air. Then you sweep the piece across the mist of water. You really need very little water and by sweeping across the mist that is in the air, you won't use too much water. I then attached the silhouette to the ear wire by using a jump ring.
And here is the finished piece. They are very lightweight and really fun to wear.
That's my project. Thanks for taking the time to view it and I hope you enjoyed it. Be sure to leave me a comment. I would love to hear what you think.
No comments:
Post a Comment